I&J4000-LF Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187
Rev. E - Jan. 08
- Page 80 -
© 2008 I&J Fisnar Inc.
5.3 Move To Temp Point
Move To Temp Point retrieves a XYZ position which was stored with Save Temp Point.
5.4 Undo
Program
Cancels the last change to the program. Returns to the program state prior to the last
change.
5.5 Redo
Program
Re-does the last change to the program, which was canceled with Undo.
5.6 Debug
Program
Runs the program in Debug mode, using the speed set in Debug Speed starting at the
current point location.
5.7 Move To Home Position
Move To Home Position
will move the tip to the home location using either the default
values (X=0, Y=0, Z=0) or the user-specified location defined in the
Setup
Home
Position Setup
command. This command cannot be used as a program instruction. It can
be used during program editing to confirm the location of the home position.
5.8 System
Information
System information will display the dispensing Software version currently installed in the
robot.
5.9 Execute
Point
Execute Point
will run a selected command. Use the –1 & +1 keys to locate the command
that you want to execute.
For example, if you select an address containing a circle, the Execute Point will cause the
tip to move in a circular path.
Summary of Contents for I&J4000-LF Series
Page 130: ......