- 13 -
DVI-I Connector (Digital/Analog)
Pin
Signal(DVI-I)
Pin
Signal(DVI-I)
1
TMDS Data2-
16
Hot Plug Detect
2
TMDS Data2+
17
TMDS Data0-
3
TM DS Data2/4 Shield
18
TMDS Data0+
4
TMDS Data4-
19
TMDS Data0/5 Shield
5
TMDS Data4+
20
TMDS Data5-
6
DDC Clock
21
TMDS Data5+
7
DDC Data
22
TMDS Clock Shield
8
Analogue Vertical Sync.
23
TMDS Clock+
9
TMDS Data1-
24
TMDS Clock-
10
TMDS Data1+
C1
Analogue Red
11
TMDS Data1/3 Shield
C2
Analogue Green
12
TMDS Data3-
C3
Analogue Blue
13
TMDS Data3+
C4
Analogue H. Sync.
14
+5V Power
C5
Analogue Ground
15
Ground (return for +5V, H. Sync. and V. Sync.)
Power Saver
This monitor has a built-in power management system called Power Saver which saves energy by
switching the monitor into low-power mode when it has not been used for a certain amount of time. The
monitor automatically returns to normal operation when you move the computer’s mouse or press a key
on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods (at back of monitor). The power saver system operates with a VESA DPMS compliant video
card installed in your computer. Use software utility installed on your computer to set up this feature.
There are two ways to reduce a product’s energy consumption: by using components that require less
power or by using power management software to modulate the energy consumption of these
components.
iameco
™
employs both techniques to maximize energy efficiency.
We believe efficiency should be the norm. Our computer monitors ship with power management enabled,
meaning that a low-power sleep mode will automatically activate if there has been no user activity for 10
minutes. Another benefit of energy efficiency is lower power bills.
* Typically 17”, 19” monitors
State
Normal
Operation
Power Saving Mode
EPA/ENERGY 2000
Power Switch Off
Unplug
Power Indicator
Green
Orange, Blinking
No Light
No Light
Power Consumption
~30W 1W
1W
0W
Power Supply
100-240 V(AC)
XV1-32
XV1-40
XV1-46
Power Consumption
< 190.OW
< 270.OW
<310.OW
Power Consumption
< 5W
< 5W
< 5W
Power Input
110-240 V
110-240 V
110-240 V
Plug and Play capability
This monitor can be installed on any plug and play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases, monitor
installation will proceed automatically, unless the user wishes to select alternate settings.
Note:
See Power Saver described above for further information regarding power-saving functions. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long
periods. Always use your PC in S3 mode, which is set up in BIOS. All
iameco
™
XPCs are factory set to S3
mode to conserve energy. Do not display a still picture for a long period, as this could cause a residual
image (afterburn).
