MAN-051 ING
21
2.9.19
FIX THE CAP TO THE H.T. CABLE WITH
A PLASTIC CLAMP (SEE FIG.39).
•
INSTALL THE SPARK PLUG.
TORQUE AT
20 ÷ 26 Nm (175 ÷ 230 in-lb)
•
INSTALL THE CAP ON THE SPARK PLUG.
NOTE:
FOR A CORRECT DIGITAL IGNITION
OPERATION, THE CAP AND / OR THE SPARK
PLUG, MUST BE OF THE RESISTIVE TYPE
AND HAVE A RESISTIVITY OF 5 K
Ω
MIN.
INSTALL THE INTAKE SILENCER
2.10
-MAKE SURE THAT THE FILTER HAS THE
INLET HOLES TOWARDS THE UPPER SIDE
(SEE FIG.40) AND THAT THEY ARE NOT
PLUGGED.
-TIGHTEN THE CLAMP ON THE CARB. AND
FIX THE FILTER TO THE CHASSIS SIDE
RAILS WITH A "CRADDLE" SHAPE SUPPORT
(SEE FIG.41).
INSTALL THE EXHAUST
NOTE:
SEE SECTION 3.8 FOR RECOMMENDATIONS
ON THE EXHAUST
2.11
- INSTALL THE EXHAUST SILENCER ON THE
ENGINE FITTING AND SECURE IT WITH THE
2 SPRINGS (SEE FIG.42).
-
FIX THE SILENCER ON THE CHASSIS
"CRADDLE " SUPPORT.
THE ENGINE IS READY TO BE STARTED
Fig.39
Fig.41
Fig.40
Fig.42
