MAN-051 ING
15
INSTALLATION OF THE CLUTCH
COVER WITH H.T. COIL
2.8
2.8.1
CONNECT THE H.T. COIL GROUND
CABLE TO THE CRANKCASE BY MEANS OF
THE M6 SCREW ON THE FRONT FOOT (SEE
FIG.17).
TORQUE AT 8 ÷ 10 Nm (70 ÷ 90 in. lb)
HEXAGONAL WRENCH - 5 mm
ATTENTION:
MAKE SURE THAT THE COPPER GROUND
CABLE ALWAYS CONNECTS THE H.T. COIL
WITH THE ENGINE. AN INADEQUATE
GROUNDING COULD DAMAGE THE IGNITION
SYSTEM BEYOND REPAIR.
THE POSITION OF THE H.T. COIL HAS BEEN
CHOSEN TO BE AS FAR AS POSSIBLE FROM
THE EXHAUST AS THE EXCESSIVE HEAT
COULD DAMAGE THE H.T. COIL, BEYOND
REPAIR.
2.8.2
INSTALL THE CLUTCH COVER WITH H.T.
COIL (SEE FIG.18).
TORQUE THE 3 SCREWS M6 AT 8 ÷ 10 Nm
( 70÷ 90 in .lb)
HEXAGONAL WRENCH - 5 mm
Fig.17
Fig.18
