MAN-051 ING
14
2.7
INSTALLATION OF THE ENGINE ON
THE CHASSIS
2.7.1
PLACE THE ENGINE ON THE TWO SIDE
RAILS AND SECURE THE MOTOR-MOUNT
WITH THE TWO CLAMPS (SEE FIG.13)
SUGGESTION:
DO NOT TIGHTEN THOROUGHLY THE
CLAMPS UNTIL THE CHAIN IS NOT
INSTALLED AND PROPERLY ALIGNED .
2.7.2
CHECK THE ALIGNMENT OF THE
ENGINE SPROCKET AND THE AXLE
SPROCKET WITH A STRAIGHT EDGE (SEE
FIG.14).
2.7.3
INSTALL THE CHAIN (PITCH: 7.775)
(SEE FIG. 15).
2.7.4
MOVE
THE ENGINE ON THE RAILS AND
OPTIMIZE THE CHAIN TENSION .
ATTENTION:
THE CHAIN PLAY MUST BE OF APPROX.
15mm, MEASURED IN THE SHOWN POINT
(SEE FIG. 16).
2.7.5
TIGHTEN THE CLAMP SCREWS
HEXAGONAL WRENCH 8mm
Fig.14
Fig.15
Fig.13
15mm
Fig.16
