MAN-051 ING
13
CHARGING THE OIL IN THE GEAR
BOX
2.6
2.6.1
REMOVE THE OIL BREATHER PLUG
(REAR PART OF THE ENGINE) (SEE FIG.10).
12 POINT WRENCH - 11mm
REMOVE THE OIL LEVEL PLUG (FRONT PART
OF THE ENGINE)
(SEE FIG.11).
HEXAGONAL WRENCH - 4mm
2.6.2
FILL WITH 33cc “IAME EP100”OIL THE
GEAR BOX
(SEE FIG.12).
NOTE:
IF THE LEVEL IS CORRECT YOU WILL SEE A
LIGHT OUTCOME OF OIL FROM THE OIL
LEVEL PLUG.
INSTALL THE OIL LEVEL PLUG
TORQUE AT A 12 ÷ 15 Nm
INSTALL THE OIL BREATHER FITTING
TORQUE AT 12 ÷ 15 Nm
Fig.10
Fig.11
Fig.12
