IAME Parilla Leopard TaG Series, Assembly Instructions & User Manual

Page: 42 / 46

MAN­048 ING 40
6.
­ CHECK THAT O­RING "H" IS INSTALLED ON
THE STARTER HEAD.
­ INSERT STARTER DRUM ON THE HEAD
BEING CAREFUL TO PREVENT ROTOR
FROM ROTATING AND TO PREVENT THE
BRUSHES FROM FALLING OUT OF THEIR
SEAT (see Fig. 19).
­ SCREW THE 3 SCREWS M5 (see Fig.20).
(SCREWDRIVER)
­ CHECK THAT THE STARTER ROTOR
ROTATES FREELY.
­ CONNECT THE INPUT WIRING
TO THE STARTER WITH THE SCREW M4
(see Fig.21).
(SCREWDRIVER)
ASSEMBLING THE STARTER
­ PLACE THE STARTER IN SEAT (see Fig.22).
OIL O­RING TO MAKE EASIER
INSTALLATION.
N°3 SCREWS TCH M6x35
TIGHTEN AT A 8÷10 Nm ( 70÷90 in­lb )
(5mm WRENCH – T TYPE)
Fig.19
Fig.20
Fig.21
Fig.22