MAN048 ING
10
3.3
EXHAUST HEADER ASSEMBLY
NOTE:
THE ENGINE IS SUPPLIED
WITH THE
EXHAUST GASKET AND NUTS ALREADY
INSERTED. WHEN THE SHIPMENT IS MADE
AN EXHAUST COVER GASKET IS PROVIDED
TO PROTECT THE INTERNAL PARTS.
3.3.1
REMOVE THE NUTS AND THE EXHAUST
COVER.
3.3.2
MAKE SURE THE EXHAUST GASKET IS
IN SEAT AND INSTALL THE EXHAUST
HEADER (SEE FIG 1).
3.3.3
INSTALL THE THREE WASHERS
3.3.4
INSTALL THE THREE NUTS.
TORQUE AT 9 ÷ 11 Nm (80 ÷ 100 inlb)
12 POINT WRENCH 10 mm (OR OPEN WRENCH 10 mm)
PREPARATION AND INSTALLATION OF THE MOTORMOUNT
NOTE: ALL THE DIMENSIONS ARE IN MILLIMETERS
3.4
3.4.1 DRILL 4 HOLES (DIAM. 8.5mm) IN THE MOTORMOUNT
Fig.1
MOTOR MOUNT HORIZONTAL VIEW
Summary of Contents for Parilla Leopard TaG Series
Page 46: ...MAN 048 ING 44...
