IAME Parilla Leopard TaG Series, Assembly Instructions & User Manual

Page: 22 / 46

MAN­048 ING 20
3.8.17 PLACE THE WIRING HARNESS
BATTERY TERMINALS UNDER THE
BATTERY STRAP (SEE FIG. 36).
SUGGESTION:
NEVER CONNECT THE BATTERY UNTIL
YOU ARE READY TO START THE ENGINE.
SEAL THE BATTERY TERMINALS WITH
PLASTIC TAPE TO AVOID THAT EVENTUAL
VIBRATIONS MIGHT DISCONNECT THE
TERMINALS.
3.8.18 SCREW THE SPARK CAP ON THE
H.T. COIL (SEE FIG. 37).
3.8.19 FIX THE CAP TO THE H.T. CABLE
WITH A PLASTIC CLAMP (SEE FIG. 38).
·
INSTALL THE SPARK PLUG.
TORQUE AT 20 ÷ 26 Nm (175÷230 in­lb)
·
INSTALL THE CAP ON THE SPARK
PLUG.
3.9 INSTALL THE INTAKE SILENCER
­MAKE SURE THAT THE FILTER HAS THE
INLET HOLES TOWARDS THE UPPER SIDE.
­FIX THE FILTER ON THE CARB. WITH A
STEEL CLAMP AND THE FILTER TO THE
CHASSIS
SIDE RAILS WITH PLASTIC
CLAMPS (SEE FIG. 39).
Fig.36
Fig.37
Fig.38
Fig.39