MAN048 ING
39
4.
5.
REPLACEMENT OF THE BRUSH “B”
UNLOOSE THE SCREW M3 “G” (see Fig.15)
EXTRACT THE BRUSH
FIX THE NEW BRUSH WITH SCREW M3
(SCREWDRIVER)
CLOSING THE STARTER
INSERT THE NEW BRUSH SPRING "A" INTO
ITS SEAT.
INSTALL THE BRUSH .
KEEP THE BRUSH IN PLACE BY PRESSING
TOWARDS THE OUTER AND CLAMP IT WITH
AN IRON WIRE BENT AS A HOOK.
REPEAT THE SAME PROCEDURE TO
INSTALL THE BRUSH “B” (see Fig.16).
INSTALL THE STARTER ROTOR BETWEEN
THE BRUSHES AND CHECK, THAT THEY
ARE ALWAYS IN CONTACT WITH THE
CYLINDRIC COPPER PART OF THE ROTOR,
EVEN WHEN THEY ARE RELEASED (see
Fig.17).
OUR SUGGESTION:
TO IMPROVE THE BRUSHES LIFE, SECURE
THE LITTLE WIRES WITH SILICONE (see
Fig.18).
Fig.15
Fig.16
Fig.17
Fig.18
Summary of Contents for Parilla Leopard TaG Series
Page 46: ...MAN 048 ING 44...
