5. Maintenance Inspection
42
(2) Flip up the sheet with a care not to bend it, clean the ball screw and apply grease with hand,
and then move the slider back and forth to evenly spread out the grease.
Also, wipe away the excess grease and splashed grease at last.
(3) On the guide, use a spatula to push the grease in between the slider and the base, or supply
grease with a grease injector and move the slider to spread the grease out evenly.
Also, wipe away the excess grease and splashed grease at last.
(4) Attach the side cover.
Pay attention on the stainless steel sheet in this process so it would not get damaged.
(5) On the guide, supply grease on the other side in the same manner.
(6) At last, hold the stainless steel sheet on the alignment mark and affix the screws, and check
by moving the slider back and forth that there is no meandering on the sheet.
Caution : In case the grease got into your eye, immediately go see the doctor to get
appropriate care.
After finishing the grease supply work, wash your hands carefully with water and
soap to rinse the grease off.
