4. Setting of the Home Position
37
4.4 Appendix How to Use the Origin Mark
Please affix these marks to the actuator as origin markers as needed.
Origin mark sticker
Origin mark scale x 4 Origin mark x 4
(scale: 1 mm graduation mark, 10 mm width)
•
Peel off the marks from the base sheet.
Note 1. Every mark has stickey back.
2. Remove sear and stain from the surfase.
3. Avoid Label or nameplate as a marking location.
[1] Used as origin position
•
Place the marks when the actuator is stopped at origin position.
[2] Used as stop positions
Example of Use
Contents of sticker
On the slider
On the base
Motor
x 1 sheet
On the slider
Motor
At stop positions on the base
