IAI EC-ST15, Instruction Manual

Page: 20 / 210

Precautions for Handling Wireless Operation
Intro-12
Precautions for Handling Wireless Operation
When the option for wireless communication support (model: WL, WL2) is selected, a
wireless communication circuit board is built into the ELECYLINDER. Certificates and
self-declarations regarding the wireless function are handled under the model name below
for the wireless circuit board.
Model name: IABL3827
This product uses the 2.4 GHz radio band known as an ISM band. This frequency range is
used by various devices such as microwave ovens and wireless LAN, so that
communication may be disrupted by radio disturbance.
Use of this device is permitted within the following countries (regions) only. Use in other
countries (regions) requires certification to be obtained based on the laws and regulations of
the relevant country (region).
Wireless frequency 2,400
〜
2,483.5MHz
Wireless output +5dBm
【US】
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure limits. This transmitter must not be colocated or operating with any other
antenna or transmitter.
【CANADA】
This device complies with Industry Canada licence-exempt RSS standards.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence
L'exploitation est autorisée aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.