23
Lower Metal Shelf
Item
Description
Qty
1
Lower Metal Shelf
1
HARDWARE KIT HWR072
A
1/4-20 X 1.000 Hex Head Bolt
4
B
1/4 Fender Washer
4
C
Unistrut Nut 1/4-20
4
Step 1:
Install the unistrut nuts item E into the pedestal leg assembly channels by first aligning the nuts with the
channel then pushing them into the pedestal channel compressing the spring. Then rotate the nuts clockwise
and release them to lock into place. The unistrut nuts can be moved forward and backward to adjust to
location of the lower metal shelf in relationship with the front edge of the bench.
Step 2:
Attach the lower metal shelf by installing the 1/4-20 X 1.00 hex head bolts and 1/4 flat washers through the
slots in the lower metal shelf into the unistrut nuts in the pedestal channels. The lower metal shelf can be
positioned forward and backward to fit the operator’s needs.
Step 3
At this point the bench assembly is fairly heavy. Be sure that no assemblers are injured in the process of
turning the bench over onto its pedestal leg assemblies. Turn the bench over onto its pedestal leg assemblies
being very careful not to damage the worksurface by either dropping it or by pulling on the pedestal legs too
hard. When the bench is turned over continue the assembly process.
