Fig.20 – The inclusion of separately selected protocols in the list of alarm events
Being in this sub-menu, you can select and activate (or deactivate) separate data transfer protocols by press-
ing
. Activated protocols are highlighted in red.
2.3.3.5.4 Duration.
This is the setting for the minimum event duration, the exceeding of which triggers an alarm. Events of
shorter duration will not be registered.
Being in sub-menu "Security" mode settings, if necessary, activate (or deactivate) "
Duration
" items by
pressing the
button. If it is necessary to change the time interval (5 sec by default), then press the
button.
Numerical value selection will be activated in seconds, as shown in Fig.21.
Fig.21 – Minimum alarm duration setting
Select the necessary value ranging from 1 to 60 seconds by pressing the
and
buttons. Confirm the
selection by pressing
.
2.3.3.6 Time Setting Displays.
While in the main menu (Fig.13), select the"Display off" item by pressing the
and
buttons and
confirm the selection by pressing the
or
button. A sub-menu will appear (Fig.22):
Fig.22 – The display of time settings
Select the necessary timeout period, after which the Product screen will be turned off
to save battery power
if there
is no activity by pressing
and
buttons, or "Always on". Confirm (if changes are necessary) parameter
