34
i3-TRNG-CAMS-Ax47R_67R-UM.indd
Rev. 171109
Sending E-mail by DEFOCUS:
Note:
SMTP settings must be configured for this feature.
•
Enable:
Check to Enable scheduled E-mail after each Defocus Event. Snapshot
image will be added to the email. Note that at least one MJPEG stream must be
enabled for this function in Video setup tab.
•
Subject:
Enter the E-mail subject.
•
Message:
Enter E-mail body message.
Schedule:
•
Configure arming schedule for Defocus events. Enable days of the week when
Defocus event detection will be active (enabled). Set the active time period for each
enabled day by using the drop-down menus for
Start
and
End Times
to select the
hours and minutes, respectively. By default, Defocus event detection is set to stay
active 24/7.
After making any setting adjustments, remember to click the
Save
button to
save any changes made.
6.8 Communication Setup
The Communication tab is used to configure network and communication settings on
the camera as well as camera OSD settings.
Note: Do not configure SNMP settings in this tab as these are reserved for development
and advanced troubleshooting by the manufacturer only and are not required for normal
functioning of this camera
RTSP Settings
•
Authentication:
Enable to allow users to get the video stream using third party
players, such as VLC with the help or RTSP protocol.
UPnP Settings
•
UPnP:
Set to
On
to enable or
Off
to disable.
Universal Plug and Play (UPnP) is a set of networking protocols that permits
networked devices, such as
personal computers, printers,
Internet gateways, WiFi access
points and mobile devices to
seamlessly discover each other’s
presence on the network and
establish functional network
services for data sharing.
Network Settings
•
DHCP:
Set to
Enabled
or
Disabled
to have the network automatically assign an
IP address to the camera.
