33
Rev. 171109
i3-TRNG-CAMS-Ax47R_67R-UM.indd
Sending E-mail by SCHEDULE:
Note:
SMTP settings must be configured for this feature.
•
Enable:
Check to Enable scheduled E-mail after each Trigger Interval. Snapshot
image will be added to the email. Note that at least one MJPEG stream must be
enabled for this function in Video setup tab.
•
Subject:
Enter the E-mail subject.
•
Message:
Enter E-mail body message.
Schedule:
•
Configure arming schedule. Enable days of the week when scheduled recording
will be active (enabled). Set the active time period for each enabled day by using
the drop-down menus for
Start
and
End Times
to select the hours and minutes,
respectively. By default, Schedule arming schedule is set to stay active 24/7.
Arming Schedule Setting > Defocus
Defocus detection compares the
sharpness of consecutive video
frames.
Detected Defocus events can
trigger a video clip or snapshot
recording to the microSD card
or snapshot recording to the
configured FTP. On-screen display
and email notifications are also
available.
Note:
All actions are subject to
schedule.
•
Enable:
Check to Enable
Defocus event detection.
Store to:
•
Snapshot:
Check to save a
*.jpg snapshot to the microSD
and/or FTP after each Defocus
event.
•
Record:
Check to save a *.mp4 video clip to the microSD after each Defocus
event.
On Screen Display:
On Screen Display feature will display entered text on the video screen whenever
Defocus event is detected.
•
Enable:
Check to enable On Screen Display text when Defocus event is detected
by the camera.
•
Text:
Enter the text that will be displayed at the time of Defocus event detection.
The OSD text settings are configured under Communication setup tab
(See Section
6.8 for more information).
