20
i3-TRNG-CAMS-Ax47R_67R-UM.indd
Rev. 171109
6.2 Basic Setup
Click the Setup button to access Annexxus camera Setup features.
You may switch to the Advanced Setup mode at any time by clicking the
Advance Setup
button in the bottom left-hand corner. To switch back to the Basic
Setup, click the Basic Setup button.
Configure the camera’s Primary and Secondary video streams in Basic Setup.
After making any setting adjustments, click the
Save
button.
Stream 1 - Primary Streaming:
•
Video Codec:
Set the compression mode to H264 (recommended) or MJPEG.
•
Resolution:
Set the primary stream resolution of the recorded video to:
QXGA (2048×1536) - Ax67R only, Full HD (1920×1080) - Ax67R only, Quad VGA
(1280×960), HD (1280×720), SVGA (800×600)
•
Frame Rate:
Set the frame rate for the primary stream recording. Available frame
rate settings: 1, 3, 7.5, 10, 15, 30 fps or choose Custom and enter frame rate.
•
VBR Max bit rate
/
CBR bit rate
(for H264): Set the video bit rate between
64-20000 kbit/s. Default value is dependent on the Resolution and Frame Rate.
•
H264 GOP
(I-Frame Interval): Provide a value from 1-60. The default value will
follow the Frame Rate.
•
H264 Rate Control Mode:
(for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate).
»
VBR
(Variable Bit Rate) (recommended): This setting will produce a variable
bit rate video stream, however the video quality will remain constant resulting
