2 Camera connection & Annexxus Installation
Topics covered
Connecting the network camera
Network camera IP configurations
Annexxus Web Viewer Installation and Setup details
Annexxus Advanced Setup
Note: Internet Explorer version 6.0 or higher is necessary to connect with an i3 International
network camera.
2.1 Connecting a network camera
Two methods of connecting a network camera and PC are shown below:
i³ iP-Pro Server
Crossover direct connection
LAN
VIA a Gigabit Switch
i³ iP-Pro Server
Connection type: 1
Connection type: 2
Network camera
Network camera
Network camera
Network camera
2.2 Network Camera Default IP Configurations
The RJ-45 Network Port on the network camera will connect to an Ethernet/Fast Ethernet
standard (10/100Base-TX) network, complying with the IEEE 802.3U standard. Annexxus device
may be connected to a hub, switch or router with a straight through CAT5e cable, or directly to
the DVR/NVR with a crossover CAT5e cable.
Network Settings:
Ax32V Default IP configurations :
IP Address: 192.0.0.16
Subnet Mask: 255.255.255.0
2.3 Annexxus Web Viewer Installation and Setup details
Note: Internet Explorer version 6.0 or higher is necessary to connect with an i3 International
network camera.
2.3.1 Installing Annexxus Web Viewer and accessing Setup mode
1. Connect the network camera to the supported power source in accordance with the
connections diagram.
5
