www.i2m.it/en
29
Options
(Options submenu tree)
The “Options” menu shows general information about the system. It is possible to see the installed firmware
version, choose the language (if more than one language is installed), choose the display brightness and
the time zone.
Particular attention must be paid to the “standby time after shutdown” option. The system requires about
10s seconds to complete the power-on. This time can be reduced by switching Chrome in standby mode
instead of turning it off, this way the time needed by Chrome to power on from the standby mode is reduced
to zero. When the system is in standby mode it absorbs about 150mA, therefore, the system can stay in
standby mode for no more than 10-12 hours. In order to preserve the battery charge, use the “standby time
after shutdown” option to choose the maximum standby mode time. After this time the system will be
automatically turned off.
The “Finish detection” option allows to enable the crossing of the finish line function, not via the GPS but
via the signal from an external transponder. To read the external transponder the appropriate interface for
the transponder has to be connected.
Summary of Contents for Chrome Lite
Page 2: ...www i2m it en 2 ...