I2M Chrome Lite, User Manual, Page: 11 / 31

www.i2m.it/en
11
motorcycle and therefore has to be configured in the Chrome unit’s menu. The unit is able to receive signals
up to 20V only.
1 x Water Temperature Input – (0-5V) input is used for water temperature. The unit has been
preconfigured for some sensors and 12V is the maximum voltage for this input.
1x Oil Level Input – (0-5V) input is used as an alarm if the oil level is too low. The alarm level must be
configured in the alarm’s management menu and 12V is the maximum voltage for this input.
1x Fuel Level Input – (0-5V) input is used as an alarm if the fuel level is too low. The alarm level must be
configured in the alarm’s management menu and 12V is the maximum voltage for this input.
16-Pin Connector 20-Pin Connector
1 12V Battery Power Supply
(red)
1 Speed 2
(brown)
2 Fuel
(yellow)
2 Analogue Battery Ground
(black)
3 12V Ignition Voltage
(light orange)
3 12V Output
(pink)
4 Oil
(black & white)
4 Analog 1
5 Battery Ground
(black)
5 Lambda
(red)
6 Water Temperature
(blue)
6 Analog 2
(green)
7 Battery Analog Ground
(black)
7 Lambda
(white)
8 Neutral
(grey)
8 Analog 3
(yellow)
9 Button “UP”
(black with white indicator)
9 CAN-low
(white & black)
10 USB Data-
(white)
10 Analog 4
(light orange)
11 Button “DOWN”
(black)
11 CAN-high
(white & red)
12 USB Data+
(light green)
12 Analog 5
(purple)
13 RPM
(green)
13 Lambda
(yellow)
14 USB Vcc (+5V)
(red)
14 Analog 6
(blue)
15 Speed 1
(orange)
15 Lambda
(green)
16 GPS Data
(white)
16 Analog 7
17 Lambda
(grey)
18 Analog 8
19 Lambda
(black)
20 5V Output
(red & white)