www.i2m.it/en
23
Chrome Plus allows a WiFi connection towards an existing net. You should plug to the USB port a TP-LINK
TL-WN725N, then activate the connection setting net name (or choosing among the available ones) and
password. WiFi will be automatically disconnected as soon as the engine is started if the Gopro controller
is not set (the WiFi test below GPS icon would show the connection). It is also possible to use this WiFi
connection to download data by the appropriate Danas function (in the on line menu) if the PC is connected
to the same WiFi.
In order to control a GoPro cam (Hero3, Hero3+, Hero4) you should activate the dedicated function (and in
case of a Hero4 you should also set the mac address – you can copy it without the dash from the info file
in the GoPro sd). Chrome Plus will turn on the GoPro at turn on end will start recording synchronous with
data recording. Gopro should have an active WiFi and all the automatic shut down disabled.
Summary of Contents for Chrome Lite
Page 2: ...www i2m it en 2 ...
