I-View ANYCAM DM-2MIPR04 Series, Manual

Page: 58 / 79

58

Capture Quality:
Setup the Snapshot image quality, high value get better quality and bigger file
size.

Face Ex Ration (Width): S etup the value, the area of face image will extend percentage width
area when snapshot.

Face Ex Ration (High): Setup the value, the area of face image will extend percentage high area
when snapshot.

Face Quality Threshold: Setup the minimum quality of threshold to snapshot when face
detection, the system will ignore when the quality less than the setting number. High quality
will get more accurate result of face recognition, but maybe lost some face who in the database.

Largest Only:
The camera just takes snapshot of the largest face when enable this function. The
reset face of image will be ignored.

Face Capture Config

Enable: Check ” Enable ” and select the schedule to enable Face detection function.

Enable Max Face Width: Check this icon and setup the maximum pixels of face, the system
will ignore to snapshot the image when the pixels higher than the setting number.

Enable Image Width:
Check this icon and setup the maximum pixels of image, the system will
ignore to snapshot the image when the pixels higher than the setting number.

Capture Mode: Drop and select mode, there are 4 modes – Interval | Entry | Leave \ Entry &
Leave. The camera will follow up the mode to snapshot when the face is detected.

Full JPEG : Check the icon will take full image when face detection.

Full JPEG Quality : Check this icon to choice the full image quality when face detection.

Enable FTP: Check this icon will send out the snapshot to FTP server.

Face Recg Config

Enable: Check to enable auto face recognition when detect the face. .

Interval:
Setup the value of face recognition interval period.

Linkage Setting

Snapshot: Check “Snapshot ” and then select the value of snap interval and Number once the
event triggers that the camera will snapshot and save into the SD card or HDD.

Record: Check “Record ” once the event triggers once the event triggers that the camera will
snapshot and save into the SD card or HDD.