50
Retrograde Detect:
Click this button to setup the parameters of the retrograde detects function.
Enable:
Enable or disable the retrograde detect function.
Arming Schedule:
Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
Setup the cross line:
Click “
Drawing
“
icon, then p
ress and drag the left Mouse button to setup the
detection lines from Detect area. Click the left button of Mouse to setup the A
B direction after
setup the detection area and then right click the Mouse button complete the region and detection
setting. You can click “ Swap AB
”
to exchange the Point A and B position.
Clear:
Click Clear to delete all detection regions
Detect Area:
To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
Detection Type:
There is “A
B Alarm for the detection type and you can click the
Swap AB
icon
to change the direction.
Object Percent:
Setup the minimum percentage ration (target size/ image area) of effective
counting targets. Once the target
s ration is smaller than the setting value, the system will ignore the
target which passing through the trigger line.
Email:
Check “Email
”
and once the event triggers that it will send Email to setting email address.
Summary of Contents for ANYCAM DM-2MIPR04 Series
Page 18: ...18...
