IACER Srl
15
MNPG148-06
Operating instructions
It is recommended reading the entire user manual before using.
To start the therapy, turn MIO-CARE PRO on using the
button.
PREADJUSTED PROGRAMS
Read the follow instructions to use the preadjusted programs and start the
therapy:
1.
Select the program group using the
MODE/ESC
button (NEMS, TENS,
BEAUTY, MEM).
2.
Select the program using
PRG+
and
PRG-
buttons (make reference to
the follow sections to get all technical specifications).
3.
Increase current intensity for the channels using CH1 and CH2 (
▲
)
buttons. The value can be adjusted with stepping 1mA. Press CH1 and
CH2 (
▼
) buttons to decrease the intensity.MIO-CARE PRO recognize
the electrodes connection: in case of faulty connection, when the
intensity reaches 15mA the value is resetted to zero.
4.
The remaining time is showed on the display of MIO-CARE PRO. An
acoustic signal advises the user when the treatment is completed.
5.
Turn off the device keeping pressed the
button for at least two
seconds.
FREE MEMORIES (ADJUSTABLE PROGRAMS)
With MIO-CARE PRO you can set the parameters according to your needs or
indicated by the doctor/physical therapist using the MEM programs.
Read the following instructions to adjust the parameters:
1.
Select
MEM
by pressing
MODE/ESC
button. Scroll the programs using
PRG+
and
PRG-
buttons to display the preadjusted technical
specifications. Read the following instructions to adjust the chosen
program parameters: time, frequency and width impulse.
2.
Adjust therapy time
TIME-min
, pressing
▲
(increase) and
▼
(decrease) CH1 or CH2 buttons by increasing and decreasing the
time value. Press SET to confirm.
3.
Adjust frequency
HZ
, pressing
▲
(increase) and
▼
(decrease) CH1 or
CH2 buttons by increasing and decreasing the frequency value. Press
SET to confirm.
4.
Adjust width impulse
µs
, pressing
▲
(increase) and
▼
(decrease) CH1
or CH2 buttons by increasing and decreasing the width impulse value.
5.
Press OK to confirm.
