IACER Srl
14
MNPG148-06
Should any foreign materials penetrate the device contact the retailer or
manufacturer immediately. If dropped down, check that the housing is not
cracked or damaged in any way; if so, contact the retailer or manufacturer.
Should you notice any changes in the device’s performance during treatment,
interrupt the treatment immediately and consult the retailer or manufacturer.
If the stimulation is uncomfortable decrease intensity. If the problem
persists consult a doctor.
Some patients could suffer from skin irritation or oversensitivity due
to stimulation or gel. If the problem persists, suspend the stimulation
and consult a doctor.
Consult a doctor before using MIO-CARE PRO with metallic
osteosynthesis devices.
IF YOU HAVE ANY DOUBTS REGARDING THE DEVICE USE CONSULT YOUR
DOCTOR.
Patient preparation
Before using MIO-CARE PRO clean the skin of the area to be treated; with the
cable disconnected from MIO-CARE PRO, connect the electrostimulation cable
jacks to the self-adhesive electrodes; position the self-adhesive electrodes on
the skin (see photos of electrode positions in the
Positions manual
); connect
the impulse transmission cables to the relative jacks (Channel 1 and/or Channel
2), then turn MIO-CARE PRO on.
Splitting leads use:
please use splitting leads if you want to double electrodes
number for each channel. Connect the splitting cable jacks to the self-adhesive
electrodes, with the cable disconnected from MIO-CARE PRO; position the self-
adhesive electrodes on the skin (see photos of electrode positions in the
Positions manual
); connect the splitting leads cables to the impulse
transmission cables that are connected to the relative jacks (Channel 1 and/or
Channel 2), then turn MIO-CARE PRO on.
Make sure that MIO-CARE PRO is switched off
before disconnecting
the electrodes
at the end of the treatment.
Device use
MIO-CARE PRO has 14 preadjusted TENS programs, 21 preadjusted NEMS
programs, 15 preadjusted BEAUTY programs and 12 free memories adjustable
by the user to create programs according to his needs. The program MEM 13
is a battery test.
