10-15
Command Reference Guide
/X
Exit Command Mode
Exits command mode. When issued at the Net Port, also ends the Telnet
session. Note that exiting from command mode will not terminate port
connections.
•
Any-to-Any Mode:
Exits command mode.
•
Modem Mode:
Disconnects and resets modem, hang-up message is sent,
hardware line to modem drops for 500 ms, and reset message is sent.
Availability:
Supervisor / Non-Supervisor
Format:
/X[,Y]
[Enter]
Where
,Y
is a command argument that can be used to suppress the
command confirmation prompt.
Response:
Verbose:
Disconnected.
Terse:
3.
^X
Resident Disconnect Sequence
The Resident Disconnect Sequence is used to disconnect your resident port
from another port as described in Section 6.2.3.2. Although the default
Resident Disconnect Sequence is
^X
(
[Ctrl]
plus
[X]
), the command can be
redefined via the Port Configuration Menus as described in Section 5.5.
Note:
The Resident Disconnect Sequence cannot be used to terminate
a Direct Connection.
Availability:
Supervisor / Non-Supervisor
Format (Default):
^X
Response:
Verbose:
The CMS-6R4 will send the "Disconnected" message, followed
by the Port Status Screen.
Terse:
3
Summary of Contents for CMS-6R4
