48
www.i-sens.com
www.i-sens.com
49
Setting the Alarm Function
Step 1
Setting the PP2 alarm On
Without inserting a test strip,
press and hold the
▲
button
for 3 seconds to set the post-
meal alarm. 'PP2', bell ( )
symbol and 'On' will be
displayed.The screen will then
automatically change to the
memory recall mode. At this
time, bell ( ) symbol, indicating
Four types of alarms can be set in the CareSens N Plus BT meter:
one post-meal alarm (PP2 alarm) and three time set alarms
(alarm1–3). The PP2 alarm goes off 2 hours after setting the
alarm. The alarms ring for 15 seconds and can be silenced by
pressing any button or by inserting a test strip.
Setting the Post-meal Alarm (PP2 alarm)
Note:
The PP2 alarm will automatically turn off if the meter's
time setting is adjusted to more than two hours before or just
past the currently activated PP2 alarm time.
that the PP2 alarm has been set, will be displayed on the screen.
Step 2
Setting the PP2 alarm OFF
To turn off the PP2 alarm,
press and hold the
▲
button
for 3 seconds. 'PP2', bell ( )
symbol and 'OFF' will appear
on the screen. Then the screen
will change automatically to the
memory recall mode without bell
( ) symbol displayed.
disappears
Step 1
Without inserting a test strip, press and hold
the
▲
and
●
buttons simultaneously for
3 seconds to enter the time alarm setting.
'alarm 1' will be displayed while 'OFF' blinks
on the screen.
Step 2
On pressing the
▲
button, 'alarm 1' is set
and 'On' is displayed on the screen. Press
▲
again to cancel 'alarm 1'. 'OFF' will blink on
the screen.
Step 3
Press the
▼
button to adjust the time of
'alarm 1'.
A number representing the hour will blink on
the screen. Press the
▲
button to set the hour.
Setting the Time Alarms (alarm 1–3)