34
www.i-sens.com
www.i-sens.com
35
Caution:
To avoid infection when drawing a sample, do not
use a lancet more than once, and:
• Do not use a lancet that has been used by others.
• Always use a new sterile lancet.
• Keep the lancing device clean.
Note:
Repeated puncturing at the same sample site may
cause pain or skin calluses (thick hard skin). Choose a different
site each time you test.
Using the Lancing Device
You will need a lancing device in order to collect a blood sample.
You may use the lancing device included in the CareSens N Plus
BT Blood Glucose Monitoring System or any other medically
approved lancing device.
• The lancing device is for use by a single user only and should
not be shared with anyone including other family members.
• Use a soft cloth or tissue to wipe the lancing device.
If necessary, a small amount of alcohol on a soft cloth or tissue
may be used.
Adjustable Tip
Lancet Holder
Sliding Barrel
Release Button
Load Confirmation
Window
Ejection System
Lancet
Step 1
Wash hands and sample site with
soap and warm water.
Rinse and dry thoroughly.
Step 2
Unscrew and remove the
adjustable tip.
Step 3
Insert a new disposable lancet firmly
into the lancet holder. Twist off the
protective cover of the lancet and set it
aside, then replace the adjustable tip.
Keep the protective cover to replace on
top of the used lancet after testing.
Step 4
Turn the adjustable tip until it is aligned
with the load confirmation window
and release button as shown in the
diagram.
Preparing the Lancing Device
