38
www.i-sens.com
www.i-sens.com
39
Note:
The meter may switch off if the blood sample is not
applied within 2 minutes of the
symbol appearing on
the screen. If the meter turns off, remove the strip, reinsert it,
and start from Step 2.
Good Sample Insufficient Sample
Step 9
After the
symbol appears on the screen, apply the
blood sample to the narrow end of the test strip till the meter
beeps. If the confirmation window is not filled in time because
of abnormal viscosity (thickness and stickiness) or insufficient
volume, the
Er4
message may appear.
Step 10
Apply the blood sample to the narrow end of the test strip until you
hear a ‘beep’. At this time, the display segments will rotate clockwise
while the blood is going in.
The test result will appear after the meter counts down from 5 to
1. The result will be automatically stored in the meter’s memory. If
the test strip is removed after the test result is displayed, the meter
will automatically switch off after 3 seconds. Discard used test strips
safely in disposable containers. If the Bluetooth feature is activated,
the meter will send the test result to the connected smartphone.
Note:
To transmit glucose data using the
Bluetooth feature,
• The Bluetooth feature on the meter must be
turned on,
• The meter and a smartphone must be paired,
• The SmartLog mobile app must be launched.
The meter will transmit data in the following
cases,
• When the strip is ejected after measuring,
• When the meter is turned on (only when untransmitted data
exists).
Test result