I.S.V.E. Tritotutto 50, Use And Maintenance Instructions

Page: 33 / 57

5
–
SETTING UP AND FIRST START UP 5-1
I
5 - 5
This type of stop must be used to stop the work cycle in the case of immediate risk to the
personnel or things, in the case of long stops with the machine already stopped and without
operator, or during maintenance work.
WARNING
This type of stop must be used only justifiable cases of emergency.
NOTE
To re-arm the emergency push-button the red mushroom must be pulled outwards.
5.5.3 Stop due to power cut
Should there be a power cut (BLACK-OUT), the operating cycle stops immediately which could
cause a block of the cutter group caused by material still present in the cutting chamber.
To restore the work conditions restart the machine.
Should calibration be necessary, refer to chapter 7
“
MAINTENANCE
”
.