manualshive.com logo in svg

I.R.I.S. IRISPowerscan 9.5, User Manual

Share
Download
I.R.I.S. IRISPowerscan 9.5 User Manual Download Page 142

Chapter 6 – Scanning 

134 

 

Copy to

: to make a copy of your files at another location.

 

Delete

: to delete the original files.

 

File monitoring

: to make the software automatically scrutinize the 

files of the selected folder. All new images available in the folder 
will automatically appear in the 

Scan from files

 window the next 

time you open the module. If images have already been captured, 
they will not appear in the list.    

P

AGE SETUP 

(

SCANNING PARAMETERS

) 

Page setup (scanning parameters) 

The 

Page Setup

 window allows you to set the scanning parameters 

and get ready for the scanning. You can set:  
- the scanning parameters 
- the image parameters 
- the automatic merge of documents 
- the automatic split of documents 

To access the Page Setup window:  

•

 

Click on the 

Page Setup 

button 

 on the main toolbar, or select 

Page

, 

Setup

 from the

 Settings 

drop-down

 

menu (either from the 

Start up

 window, or from the user interface).  

Summary of Contents for IRISPowerscan 9.5























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands