I.R.I.S. IRISPowerscan 9.5 User Manual Download

Page: 129 / 182

IRISPowerscan

– User Guide

121

•

Select the

Text separators, Field delimiters

and

Character

encoding

you want to use, then click

to close the settings.

•

When you are done configuring the indexing options, click

to close the options or move to the

Advanced

tabs to configure

those options.

Configuring the advanced options

The extended connectors offer several advanced options. You can,
for instance, activate the

legal archiving mode

, which ensures that

the documents you export comply with the legal archiving
regulations*, and

export

your documents to executable applications

for further processing, export them via SMTP servers (E-mail), send
them to network folders, FTP servers and Microsoft Message
Queuing services, etc.

*legal archiving: when legal archiving is activated, the documents
contain a signature that identifies: 1) the person who scanned the

Summary of Contents for IRISPowerscan 9.5























































































































































































Search results

Summary of Contents for IRISPowerscan 9.5

Reviews:

Related manuals for IRISPowerscan 9.5

Brands by name

Popular brands

I.R.I.S. IRISPowerscan 9.5, User Manual

Search results

Summary of Contents for IRISPowerscan 9.5

Reviews:

Related manuals for IRISPowerscan 9.5

Brands by name

Popular brands