208
Configure the schedule settings
Set the target camera and the time zone for which to perform the backup.
Click the [OK] button at the end to complete the schedule settings.
[Camera]
Check cameras to be backed up.
[File format]
Select a file format used for saving.
Original (n3r/n3a)/MP4
[Time (indication) required for backup one day’s data]
Displays the indication time.
When you click the [Refresh] button, the approximate current time will be re-displayed.
Note:
• Indication time displays the time when the estimated recording capacity of the day with the largest recording
capacity among the days set to record is backed up at 5 Mbps. Actual backup time will vary more or less.
• Indication time will be displayed as 99 hours if it is over 99 hours.
[Backup schedule (Total time)]
Displays the total time of backup set on the time table.
[Time table 1/2]
Set a time zone to execute backup processing.
[Backup execution date]
Select a day to be backed up.
1 day before/2 days before/3 days before
Note:
• The backed up data is saved in the schedule backup directory.
• If power to the recorder is turned off and then resumed while the backup process is being executed, any
data backed up before the power was turned off will be backed up again from the beginning. The data that
was backed up before the power was turned off can not be played back.
