manualshive.com logo in svg

i-PRO WJ-NX400K/G, Operating Instructions Manual

Share
Download
i-PRO WJ-NX400K/G Operating Instructions Manual Download Page 187

187

[Next page (>)] button

Displays the next page.

[Date]

Start time of recording will be displayed.

[Cam]

The camera number of the recorded data will be dis-
played.

[Evt]

Event type will be displayed. (

☞

 Page 178)

[Format]

Displays a file format.

Important:

• Do not remove the external storage device during 

playback of copied data on the external storage 
device. Otherwise the data stored on the SD 
memory card or the external storage device could 
be lost.

Note:

• When copying large amounts of data, more time is 

needed to display the list. 

• If you check the list of another external storage 

device, select the "HDD" on [Disk/Medium] of 
[Search] box and then select "USB" again.

• Refer to page 188 for information on how to play 

copied images.

[Operation via PC web browser]

Summary of Contents for WJ-NX400K/G

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands