109
Wide view operation panel
Camera number panel
Camera number [CAM]:
(Character color)
White: Camera is registered.
Gray: Camera is not registered.
(Background color)
Aqua: Image display area is displaying
images
Blue: Camera is registered and image dis-
play area is not displaying images.
Gray: Recording is not possible or camera is
not registered.
Red: Event recording is being performed.
Camera number switch button
: Switches camera number to display to 1 ~ 32 or
33 ~ 64.
Multiscreen buttons
Note:
• It is possible to hide/display the multi-screen
selection buttons on the operation panel. Refer to
the "Configure the settings relating to monitors"
sections (
☞
Page 48) for further information.
• When 5 or more multi-screen selection buttons
are displayed, it is possible to switch the position
of displayed buttons using the left/right buttons or
the slider.
• The 64-screen display are not available for the
sub monitor. (If any of the cameras listed in the
"Camera selection" of the "Sub monitor" tab is
selected, the sub monitor will be used.)
Sequence button
: Clicking of a sequence button can start the
sequence. Clicking any multiscreen buttons
other than the sequence button will terminate
the sequence.
Camera number panel
Multiscreen buttons
Camera number switch button
Sequence button
Note:
• During the sequence, the dragging & dropping of
the camera number panel onto live images can't
switch over camera images.
• During the sequence, the audio is not output.
When fixing the audio output in "Audio output
camera" found in the "Advanced Setup" section
under "Monitor", the audio will be output.
• While recorded images are being played back, the
sequence can't be started.
• Setting "Sequence(Wide view)" on the "Default
screen" under "User Management>User registra-
tion" and "User management>Administrator
setup" will start the sequence after login.
• When camera images are displayed in
9-screen/16-screen live sequence (4/9/16-screen
live sequence during 4K output), a black screen is
displayed at the time of the switchover of the
camera images.
• Camera images whose resolutions is set higher
than FHD (1920×1080) or 1.6 M (1280×1280) can
not be displayed in 9-screen/16-screen live
sequence on the main monitor.
Furthermore, camera images whose resolutions is
set higher than 0.4 M (640×640) or SXVGA
(1280×960) can not be displayed when using a sub
monitor.
[Operation via recorder's main monitor]
