background image

SET-UP / TESTING / MAINTENANCE 

MAINTENANCE 

Regular cleaning of this game will keep it looking 
new, and greatly enhance its appeal. 
 
Clean the windows of your TIP THE SCALE™ with a 
standard window cleaner such as Windex® 
 
Clean the cabinet sides with a good cleaner such as 
“Fantastic” or “409” and a soft rag.  A mild soapy so-
lution can be used. You may use a furniture polish 
when finished to protect the game and make it look 
more attractive, 
 
NOTE:  DO NOT USE ALCOHOL, THINNERS OF 
ANY KIND, OR PINBALL PLAY FIELD CLEANERS 
ON ANY OF THE CABINET SURFACES ESPE-
CIALLY THE DECALS.  
 
Since this game dispenses candy, it is important to 
keep the game clean. 
 
BE CAREFUL TO KEEP CLEANERS AWAY FROM 
THE CANDY TO AVOID CONTAMINATION. I.C.E. 
ASSUMES NO RESPONSIBILITY FOR IMPROPER 
USE OF CLEANERS IN THE MAINTENANCE OF 
THIS PRODUCT. 
 
It is a good idea to cover the candy and spray 
cleaner on the cleaning cloth only to avoid contami-
nation. 
 
When doing a full cleaning and all candy is removed, 
regular glass cleaner can safely be used inside the 
game. Regular glass cleaner is water soluble and 
will help to dissolve sticky candy. 

 

 

Summary of Contents for TIP THE SCALE

























Reviews: