I-Bus 0818D, User Manual

Page: 54 / 80

Chapter 6 – Platform Management Option
0818D User’s Guide 6-10
sensor output, and they are individually configurable. To change the
current settings for thresholds and hysteresis, please see the
commands
Set Sensor Hysteresis, and Set Sensor Thresholds in
the I-Bus Platform Management Programmer’s Guide. To make the
changes persistent across resets of the CMC, it is necessary to
delete the SDR for the sensor and add a new one with the new
default values. Please see the section on Sensor Data Records
(SDR) and the commands,
Reserve SDR Repository, Get SDR,
Delete SDR, and Partial Add SDR in the I-Bus Platform
Management Programmer’s Guide for more information.
All configuration parameters are stored in a non-volatile memory,
and are used to operate the CMC controller on power up.
Table 6-1. Default SDR Parameters
Sensor #
Nominal Normal
Maximum
Normal
Minimum
Upper
Non-
Recovera
ble
Threshold
Upper
Critical
Threshold
Upper
Non-
Critical
Threshold
Temp0
25
°
C 40
°
C
5°
C 50
°
C 45
°
C 40
°
C
Temp1
25
°
C 40
°
C
5°
C 50
°
C 45
°
C 40
°
C
Temp7
40
°
C
55°
C 20
°
C 70
°
C
65°
C
55°
C
Fan0 3000 RPM 3400 RPM 2800 RPM 4000 RPM 3700 RPM 3500 RPM
Fan1 3000 RPM 3400 RPM 2800 RPM 4000 RPM 3700 RPM 3500 RPM
Fan2 3000 RPM 3400 RPM 2800 RPM 4000 RPM 3700 RPM 3500 RPM
Fan3 0 0 0 1 1 1
Fan4 0 0 0 1 1 1
Fan5 0 0 0 1 1 1
Volt0 3.3V 3.47V 3.20V N/A 3.5V N/A
Volt1 5V 5.25V
4.85V N/A 5.3V N/A
Volt2 6V (Vbat) 6.8V 5.5V N/A 12.0V N/A
Volt3 -12V -11.40V -12.60V N/A -11.0V N/A
Volt4 12V 11.40V 12.60V N/A 13.0V N/A
Volt5* 120V/48V 135V/68V 110V/40V N/A 260V/68V N/A
Volt6* 120V/48V 135V/68V 110V/40V N/A 260V/68V N/A
Volt7 5V 5.25V 4.85V N/A 5.3V N/A
PWR0 0 0 0 1 1 1
PWR1 0 0 0 1 1 1
PWR2 0 0 0 1 1 1
PWR3 0 0 0 1 1 1
Continued on the next page…