6-20
Sending a text by using the voice
recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system so you can text a message to a contact by using the voice
recognition.
A
To call using voice recognition, there must be contacts stored
on the system.
A
It is available only when the Blue Link service is active.
1
Perform any of the following methods:
•
On the All Menus screen, press
Phone
.
•
On the steering wheel, press the Call button.
2
On the bluetooth message screen, press
.
3
When a guiding beep is heard, say the message.
The system sends the text to the selected contact.
e
e
Used to move to the previous or next message.
f
f
Can text a message by using the voice recognition.
>
See
“Sending a text by using the voice recognition.”
g
g
The list of menu items appears.
•
Message Settings
: Displays the message settings
screen (if equipped).
•
Bluetooth Settings
: Can change the Bluetooth
settings (if equipped).
•
Split Screen
: Can turn on or o
ff
the split screen mode.
A
The auto-reply messaging may not be available depending on
the smartphone model.
A
To edit or delete a message, pull over the vehicle at a
safe place and access the messaging function on your
smartphone. You cannot edit or delete a message from the
system.
A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:
-
Only the sender name appears when the sender
information is saved.
-
When the sender information is not saved, only the phone
number appears.
-
You cannot use the auto-reply message function.
-
When the incoming message noti
fi
cation or lock-screen
view option is o
ff
, messages cannot be received.
A
The message reader function may not be supported
depending on the system language.
H_NZK013_DN8a 20_G5WIDE[USA_EU]AVNT_L0MS7BK000_.indb 6-20
H_NZK013_DN8a 20_G5WIDE[USA_EU]AVNT_L0MS7BK000_.indb 6-20
2019-09-18 오후 3:31:26
2019-09-18 오후 3:31:26
