10-2
Solutions
Before reporting a malfunctioning system, refer to the following table and see if you can identify and
fi
x the problem. If the problem persists
or you are unable to locate your speci
fi
c need, contact your place of purchase or dealer.
Sound and display
Symptom
Possible cause
Solution
A blank screen appears and
sound is not audible.
The system is turned o
ff
.
•
Check that the start switch is in “ACC” or “ON.”
•
Press the Power button on the control panel to turn on the
system.
Sound volume is too low.
Turn the Volume knob on the control panel to adjust the volume.
Sound is muted.
Press the Mute button on the steering wheel to unmute.
Sound is audible from only one
side of the speakers.
Sound is imbalanced.
On the All Menus screen, press
Setup
>
Sound
>
Position
and adjust the sound outputs for the left and right speakers.
>
See “Position.”
The sound is cut o
ff
or noise is
heard.
Vibration occurs in the system.
When the system vibrates, the sound may be cut o
ff
or noise may
occur. This is not a system failure. The system is restored as soon as
the vibration stops.
H_NZK013_DN8a 20_G5WIDE[USA_EU]AVNT_L0MS7BK000_.indb 10-2
H_NZK013_DN8a 20_G5WIDE[USA_EU]AVNT_L0MS7BK000_.indb 10-2
2019-09-18 오후 3:31:37
2019-09-18 오후 3:31:37