FEATURES OF YOUR HYUNDAI
1- 59
NOTE:
When the A/C is operated continuously on the floor-defrost level ( ) or defrost level ( ), it may cause
fog to form on the exterior windshield. If this occurs, set the air flow control to the face level position
( ) and fan speed control to the low position.
Use the heating/ventilation system to defrost or de-
fog the windshield:
To remove interior fog on the windshield;
o Set the air flow control to the defrost ( ) position.
(The A/C will turn on automatically and the "Fresh"
mode will be activated.)
o Set the temperature control at the desired position.
o Set the fan speed control between "1" and "4" position.
To remove the frost or exterior fog on the wind-
shield;
o Set the air flow control to the defrost ( ) position.
(The A/C will turn on automatically and the "Fresh"
mode will be activated.)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
B720A02E-AAT
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING
B720A02O-1
B720B02O-1
A Type
B Type
A Type
B Type
