FEATURES OF YOUR HYUNDAI
1- 16
To fasten a 2-point static type belt, insert the
metal tab into the locking buckle. There will be
an audible "click" when the tab locks into the
buckle. Check to make sure the belt is prop-
erly locked and that the belt is not twisted.
B220A01A-AAT
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
SSA1090S
B200A01A-AAT
ADJUSTING YOUR SEAT BELT
YR10311B
o Children must always be seatbelted in
the rear seats. Never allow children to
ride in the front passanger seat.
o The shoulder belt should be positioned
midway over the shoulder nearest the
door for the most effective protection.
Never wear the seat belt under the arm
nearest the door. Wearing the belt un-
der the arm nearest the door could cause
serious or fatal injuries in an accident.
o Avoid wearing twisted seat belts. A twist-
ed belt can't do its job as well. In a
collision, it could even cut into you. Be
sure the belt is straight and not twisted.
o Be careful not to damage the belt web-
bing or hardware. If the belt webbing or
hardware is damaged, replace it.
WARNING:
You should place the lap belt portion as
low as possible and snugly across your
hips, not on your waist. If the lap belt is
located too high on your waist, it may
increase the chance of injury in the event
of a collision. Both arms should not be
under or over the belt. Rather, one should
be over and the other under, as shown in
the illustration.
Never wear the seat belt under the arm
nearest the door.
B210A01A-AAT
To Release the Seat Belt
YR10321B
The seat belt is released by pressing the re-
lease button in the locking buckle. When it is
released, the belt should automatically draw
back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.
