FEATURES OF YOUR HYUNDAI
1- 53
B670C01Y-AAT
Air Intake Control
B670C02O
This is used to select fresh outside air or
recirculation inside air.
Fresh
Recirculation
With the " " mode selected, air enters the
vehicle from outside and is heated or cooled
according to the other functions selected.
With the " " mode selected, air from within
the passenger compartment is drawn through
the heating system and heated or cooled
according to the other functions selected.
Air can be directed to the floor, dashboard
outlets, or windshield. Five symbols are
used to represent Face, Bi-Level, Floor,
Floor-Defrost and Defrost air positions.
2. Air intake control
This allows you to select fresh outside air
or recirculation inside air.
3. Fan speed control
This is used to select the fan speed.
4. Temperature control
This is used to turn the heating system on/
off and to select the degree of heating
desired.
B670B01O-AAT
Fan Speed Control (Blower Control)
B670B01O-1
This is used to select the blower fan speed.
The blower fan speed, and therefore the vol-
ume of air delivered from the system, may be
controlled manually by setting the blower con-
trol between the "1" and "4" position.
o During cruise-control driving with a
manual transaxle vehicle, do not shift
into neutral without depressing the
clutch pedal, or the engine will be
overrevved. If this happens, depress
the clutch pedal or release the main
switch.
o During normal cruise control operation,
when the "SET" button is activated or
reactivated after applying the brakes,
the cruise control will energize after
approximately 3 seconds. This delay is
normal.
B670A02O-AAT
HEATING AND VENTILATION
B690A01O-1
2
3
1
4
There are four controls for the heating and
cooling system. They are:
1. Air flow control
This is used to turn the blower fan on/off
and to direct the flow of air.
