5-4
Load and unload the machine on a flat ground.
Use the gangplank with sufficient length, width,
thickness and gradient.
Place the swing lock lever to the LOCK position
before fixing the machine at the bed of trailer and
confirm if the machine parallels the bed of trailer.
Keep the travel motor in the rear when loading
and in the front when unloading.
Do the following after loading the machine to the
trailer.
Stop loading when the machine is located
horizontally with the rear wheel of trailer.
3. LOADING THE MACHINE
Place the swing lock lever to the LOCK position
after the swing the machine 180 degree.
D11075TA05
D11075TA06
D11075TA07
1)
2)
3)
4)
(1)
(2)
