4-3
CHECK INDICATOR LIGHTS
Check if all the operating lever is on the neutral
position.
Turn the starting switch to the ON position, and
check following.
If all the lamps light ON and buzzer sounding
for 2 seconds.
After lamp check CL : 2.0, the version of
cluster program, is displayed on Monitoring
display(3) for 5 seconds and the cluster returns
to default.
Only below lamps will light ON and all the other
lights will turn OFF after 2 seconds.
Battery charging warning lamp(2)
Engine oil pressure warning lamp(1)
1)
Sound the horn to warn the surroundings
after checking if personnel or obstacles are in
the area.
Turn the starting switch to START position to
start the engine.
If the engine does not start, allow the starter
to cool for about 2 minutes before attempting
to start the engine again.
Release the starting switch instantly after the
engine starts to avoid possible damage to the
starting motor.
2)
3. STARTING AND STOP THE ENGINE
1
2
OFF
START
3
(1)
(2)
(1)
(2)
21074OP03
14074OP99
STARTING ENGINE IN NORMAL TEMPERATURE