4-13
BASIC OPERATION
Traveling position
It is the position which the traveling motor is in
the rear and the working device is forward.
Be careful as the traveling direction will be
reversed when the whole machine is swinged
180 degree
Traveling operation
It is possible to travel by either travel lever or
pedal.
Do not travel continuously for a long time.
Reduce the engine speed and travel at a low
speed when traveling on uneven ground.
1)
6. TRAVELING OF THE MACHINE
Forward and backward traveling
When the left and right travel lever or pedal are
pushed at the same time, the machine will travel
forward or backward.
The speed can be controlled by the operation
stroke of lever or pedal and change of
direction will be controlled by difference of the
left and right stroke.
Pivot turning
Operating only one side of lever or pedal make
the change of direction possible by moving
only one track.
Counter rotation
It is to change the direction at the original place
by moving the right and left track. Both side of
lever or pedal are operated to the other way at
the same time.
(1)
(2)
(3)
(4)
(5)
Travelling position
Travel motor
D11074OP25
21074OP10
21074OP11
21074OP12
