3-8-2
2. LCD main operation display
This gauge indicates the amount of fuel in the fuel tank.
Fill the fuel when the 1st step or fuel icon blinks in red.
If the gauge illuminates the 1st step or fuel icon blinks in
red even though the machine is on the normal condition,
check the electric device as that can be caused by the poor
connection of electricity or sensor.
1st step
Fuel level gauge
This gauge indicates the temperature of hydraulic oil in 12 step
gauge.
1st step
: Below 30 C(86 F)
2nd~10th step : 30-105 C(86-221 F)
11th~12th step : Above 105 C(221 F)
The gauge between 2nd and 10th steps illuminates when
operating.
Keep idling engine at low speed until the gauge between 2nd
and 10th steps illuminates, before operation of machine.
When the gauge of 11th and 12th steps illuminates, reduce the
load on the system. If the gauge stays in the 11th~12th steps,
stop the machine and check the cause of the problem.
1st step
12th step
Hydraulic oil temperature gauge
1st step
12th step
Engine coolant temperature gauge
This gauge indicates the temperature of coolant in 12 step
gauge.
1st step
: Below 30 C(86 F)
2nd~10th step : 30-105 C(86-221 F)
11th~12th step : Above 105 C(221 F)
The gauge between 2nd and 10th steps illuminates when
operating.
Keep idling engine at low speed until the gauge between 2nd
and 10th steps illuminates, before operation of machine.
When the gauge of 11th and 12th steps illuminates, turn OFF
the engine, check the radiator and engine.
1607A3CD02E
1607A3CD02D
1607A3CD02F
This displays the current time.
Refer to the page 3-8-6 to set time for details.
Time display
1607A3CD02C
This displays the engine rpm.
RPM display
1607A3CD02C
1
3
2
4
5
Default screen
Time display
RPM display
Hydraulic oil temperature gauge
Fuel level gauge
Engine coolant temperature gauge
1
2
3
4
5
1607A3CD02A
Option screen
1
3
2
4
5
1607A3CD02B
Option screen
Default screen
1)
2)
3)
4)
5)
