3-13
TRAVEL PEDAL
This pedal is used to move the machine forward or backward.
If left side pedal is pressed, left track will move.
If right side pedal is pressed, right track will move.
Refer to traveling of machine in chapter 4 for details.
(1)
(2)
(3)
SEAT AND CONSOLE BOX ADJUST LEVER
This lever is used to move the seat and console box to fit the contours
of the operator's body.
Pull the lever to adjust forward or backward over 170mm(6.7").
Adjust lever
(1)
(2)
6)
7)
21073CD46A
21073CD47
SAFETY LEVER
All control levers and pedals are disabled from operation by locating
the lever to lock position as shown.
Be sure to lower the lever to LOCK position when leaving from
operator's seat.
By pull lever to UNLOCK position, machine is operational.
Do not use the safety lever for handle when getting on or off the
machine.
Lock
Unlock
(1)
(2)
TRAVEL LEVER
This lever is mounted on travel pedal and used for traveling by hand.
The operation principle is same as the travel pedal.
Refer to traveling of the machine in chapter 4 for details.
(1)
(2)
4)
5)
RD21073CD45
21073CD46
If the CPU controller is removed, the engine does not start.
Before starting the engine, connect the connector CN-92 A with B.
Do not connect these connectors when the CPU is not removed.
CN-92
A
B
(1)
(2)
EMERGENCY ENGINE STARTING CONNECTOR
11073CD46
3)
