Genuine Accessories
44
N
O
T
E
CAUTION: DO NOT spray glass cleaner or other cleaning liquid
directly on the mirror as it may damage the electronics.
WARNING: Always use a new tether clip when reinstalling the
A-pillar trim panel. Failure to use a new clip may result in serious injury
or death in the event the airbag deploys.
Do not damage the A-pillar trim panel or tether clip.
42
41
A. Reinstall OBD II connector into lower dash panel.
B. Reinstall the two (2) connectors into switch on panel and
any other electrical connectors, if applicable.
C. Rotate the lower dash panel upwards and reinstall, making
sure the clip above the switch panel is properly engaged.
D. Reinstall the three (3) screws and close the one (1) access
cover.
E. Reinstall the dash side panel.
F. Reinstall fuse panel cover.
G. Reinstall weatherstrip and ensure it is not wrinkled.
N
O
T
E
A. Place the provided Quick Reference Guide in the vehicle's glove box.
B. Clean fingerprints, smudges, etc. from mirror and windshield, if needed.
Function Check
#2 Phillips Screwdriver
43
N
O
T
E
A. Ensure a new tether clip has been inserted into the A-pillar trim panel
and begin reinstall of the A-pillar trim panel.
B. Insert the A-pillar lower surface into the mating surface on the top of the
dash panel.
C. Move the panel closer to the A-pillar, aligning the clips with their
corresponding holes. Carefully snap the panel into place.
A. Ensure that the ignition is "ON".
B. Press each HomeLink button, one-at-a-time, and verify that the LED
indicator illuminates from behind the glass. Press the HomeLink
button a second time to turn off the feature.
C. Turn ignition to "OFF".
N
O
T
E
HomeLink
Indicator
HomeLink
Buttons
Revision Date
03/03/2020
Page 14 of 16
