![background image](http://html.mh-extra.com/html/hyundai/hych1500e-2/hych1500e-2_user-manual_2196089038.webp)
38
Common faults
Elimination method
1
The engine will not start
Read the engine users’ manual, check the fuel
level, ensure the fuel is fresh, ON-OFF switch is
ON, lubrication oil level and the emergency stop
button.
2
Engine cuts out during operation
Check if the engine stopped due to overloading,
check if the discharge chute is clear and that the
rotary blade is not jammed,
check the emergency stop lever and safety
protection switch
3
The hopper is blocked
Stop the machine, and remove the hoppers and
clear the blocked material. Don’t touch the blade
during this procedure.
4
Unusual noises
Stop the machine, check all nuts and bolts are
tight, check bearings for excessive play and that
blades and belts are not rubbing anywhere.
5
Damaged blades
Fit new blades
6
Belts slipping
Ensure thebelt tensioner is adjusted correctly or fit
new belts.
7
Poor chipping performance
Adjust the blade clearance, the recommended
clearance for rough chipping is 1.5mm-3mm and
for fine chipping is 0.5mm-1.2mm.
8. TROUBLESHOOTING
CAUTION
If troubleshooting does not solve the problem, contact your dealer or the
manufacturer directly. Use only original parts approved by the manufacturer,
otherwise a hazard risk arises.
Summary of Contents for HYCH1500E-2
Page 43: ...43 NOTES ...
Page 44: ......